zeigt den Hybridmotorenprüfstand des FKFS

Major Laboratories Automotive Powertrains as well as GIME

Institute of Automotive Engineering Stuttgart (IFS)

Practical Exercises in Automotive Powertrains
[Photo: FKFS]

H3 Vehicle Test Bench

Additional informations

  • The lab certification sheet for the individual degree programs can be downloaded via the hyperlinks on the previous page.
  • The documents for the experiments are available at ILIAS

- Please take the lab certification sheet with you to the respective experiment and have the experiment manager confirm the respective experiment.

- In the case of attempts completed online in the previous semesters, the name and date of the attempt must be entered on the lab certification sheet with the addition "online". (The verification with the electronic lists of participants takes place in the Lehrstuhlzimmer.)

- Laboratories in the field of "vehicle mechatronics" must be confirmed separately. Information on the process flow can be found in the menu there.

Only when all SF and APMB experiments have been successfully completed (including all SF/APMB experiments not carried out at the IFS!), please send the completed certification sheet by e-mail to the Lehrstuhlzimmer.

If successful participation in all experiments has been proven, the lab module will be finally booked by us in the C@MPUS portal. It is then no longer necessary to submit the certification sheet to the examination office.

Please give us about 2 weeks for processing. You make the process easier for us if you register for the lab module in the C@MPUS portal during the exam registration period.

Major Laboratories in Vehicle Propulsions

Four attempts are to be acquired from the range of specialisation subject tests.

Each experiment has its own course at C@MPUS. Please register this course to be included in the respectie ILIAS course

  • Pressure Indication (C@MPUS Nr. 420707400) [last time in winter semester 22/23]
  • Impedance spectroscopy on battery cells (C@MPUS No. 420607500) [new from ws 23/24]
  • Output Measurement (C@MPUS Nr. 420607600)
  • Data Science Approaches (C@MPUS Nr. 420607700)
  • Workshop Powertrain Topologies (C@MPUS Nr. 420607800) [new from ss 23]
  • Data Science Approaches (C@MPUS Nr. 420607700)
  • Workshop Powertrain Topologies (C@MPUS Nr. 420607800)
  • Exhaust-Gas Measurement (C@MPUS Nr. 420607900)
  • Acoustic Power Measurement  (C@MPUS Nr. 420608000)

  • Workshop "Calculation and Analysis of Internal Operations" (only during summer semester)
    (lecture "Calculation and Analysis of Internal Operations" provided!)
    -> Registration via C@MPUS subgroup of "Calculation and Analysis of Internal Operations" is required!
    -> dates see ILIAS course "Calculation and Analysis of Internal Operations"
    -> successfull participation = two attempts

GIME (APMB-Versuche)

only selectable if not already counted as SF attempt

  • Exhaust-Gas Measurement (C@MPUS Nr. 420607900)
  • Data Science Approaches (C@MPUS Nr. 420607700)
  • Pressure Indication (C@MPUS Nr. 420707400) [last time in winter semester 22/23]
  • Impedance spectroscopy on battery cells (C@MPUS No. 420607500) [new from ws 23/24]
  • Output Measurement (C@MPUS Nr. 420607600)
  • Acoustic Power Measurement  (C@MPUS Nr. 420608000)
  • Workshop Powertrain Topologies (C@MPUS Nr. 420607800)

only selectable if not already counted as SF attempt

  • Outside Noise Measurement (C@MPUS-No. 420607000)
  • Vehicle-Test Bench [offered only during the summer semester] (C@MPUS-No. 420607100)
  • Model Wind Tunnel (C@MPUS-No. 420607200)
  • Road Simulation (C@MPUS-No. 420607300)

only selectable if not already counted as SF attempt

  • Practical exercises "Elektromobilität" [C@MPUS-No. 420522700]
  • Practical exercises "Energiemanagement" [C@MPUS-No. 420522800]
  • Practical exercises "LabView" [LC@MPUS-No. 420522900]
  • Practical exercises "Motormanagement" [C@MPUS-No. 420523100]

An overview of all GIME trials can be found in the "APMB list" of the GKM:
https://www.gkm.uni-stuttgart.de/orientierung/faq/#id-46ff6e89-9

Study Program "Technikpädagogik (Technology Pedagogics)" – Major in "Fahrzeugtechnik"

All together, six experiments must be selected. Four (or five) from "Automotive Engineering" and two (or one) from "Vehicle Propulsions". With GIME no additional experiments can be selected.

This image shows Andrea Litterst

Andrea Litterst

 

Student Affairs

To the top of the page